Vention Wireless HDMI Transmitter TV Receiver Projector 5GHz WiFi 1080P@60Hz Display Dongle 50CM Distance for IOS Android Laptop

Vention Wireless HDMI Transmitter and Receiver supports screen mirroring and screen extension functions, allowing you to project the content from devices such as laptops, cameras, and cable TV set-top boxes onto high-definition TVs, projectors, and displays, providing a versatile application experience.

Plug and Play ：Ventionwireless HDMI Transmitter and Receiver are easy to use, no need for APP, Bluetooth or Wi-Fi connection, and avoiding the problems of unstable and interrupted signal transmission caused by tangled cables, Plug and Play is not limited by time, space and network

High Definition Picture Quality, Stable Signal : Vention Wireless Hdmi Transmitter and Receiver 4k support 2.4G/5G dual-frequency transmission; supports 4K decoding and 1080P ultra-high-definition video picture and audio output, the transmission distance can be up to 131ft/50M, built-in high-performance signaling equipment, the transmission delay is negligible, even through the wall signals can be connected; Worry-free signal, high-definition transmission

Special Reminder！！！
Special Reminder！！！
Special Reminder！！！

Purchasing a transmitter (TX) separately cannot be used!!!
You need to purchase a transmitter and receiver combination (TR+TX), which supports pairing one receiver with multiple transmitters (TX)

HDMI Wireless Transmitter and Receiver

1080P@60HZ Refresh Rate Output

Experience an immersive home theaterwith an enhanced screen size.

Long Distance Connections

It transmits uncompressed signals to distances of up to 50 meters with near-zero latency. 

Multipoint Connections

You can pair up to eight source devices at the same time for seamless switching between source siganls.

01
HDMl Receiver (Rx)Connect the receiver(RX)to theHDMl port of the displaydevice andconnect the power supply
02
Adjust Input SourceChoose the correct HDM!input source forthe HDMl receiver (RX)to displaythe signal accurately
03
HDMl Transmitter (Tx)Connect the transmitter(TX)to the HDMl port ofyour computer andconnect the power supply

5GHz Band Wi-Fi

Utilize a 5GHz band for smooth and synchronized audio and video playback and interference-free transmission.

Crystal Clear1 RX→1 TXS 1080P Output

Easy Guide to Connect 2 TV Screens
1. Purchase a (1 in 2 out) HDMl Splitter.
2. Connect TX on cabe box.
3. Plug RX on HDMl Splitter input port
4.Connect the splitter 2 HDMl outputs to 2 TV screens.
5.Successfully splitter 1 HDMl source to 2 TV screens.

Conference Hub：1RX-8TXs

FAQ

Q: Does it require an external power supply?
A: The receiver requires power through the USB-C port, and the transmitter may require USB-C power when HDMI power is insufficient. Please note: If the transmitter experiences power issues, connect the USB-C power supply first and then connect the HDMI port.
Q: Can I use a device without an HDMI port?
A: Devices without HDMI ports (such as ultrabooks, phones, tablets, etc.) can be used with an HDMI adapter.
Q: How long does it take to start and screen mirror?
A: Connect the transmitter to the HDMI port and simultaneously press the device pairing button. The indicator light will enter fast flash mode. Wait for about ten seconds, and the screen mirroring will be complete.
Q: What should I do if there's screen distortion or flickering during use?
A: The product relies on a 5GHz wireless network for point-to-point connections. If you experience screen distortion or flickering in areas with strong 5GHz signal interference or when there are obstacles, it may affect signal strength, resulting in reduced distance or screen distortion. We recommend trying a different location to improve the signal quality.
Q: How to address intermittent audio issues after connecting?
A: Please ensure that the product is used in an interference-free environment to avoid signal disruptions. If you continue to experience occasional audio problems, attempt a reset, reconnection, and additional testing.

Special Reminder！！！

Purchasing a transmitter (TX) separately cannot be used!!!
You need to purchase a transmitter and receiver combination (TR+TX), which supports pairing one receiver with multiple transmitters (TX)