Skip to product information
1 of 7

Wave Wholesale

Car Blind Spot Detection System BSD Sensor Drive Rear Mirror Monitoring for Chevrolet Silverado LD GMC Sierra Limited 2016~2019

Car Blind Spot Detection System BSD Sensor Drive Rear Mirror Monitoring for Chevrolet Silverado LD GMC Sierra Limited 2016~2019

Regular price $1,120.00
Regular price $1,887.00 Sale price $1,120.00
Sale Sold out
Shipping calculated at checkout.
Color Name
Quantity

Note:

Please check your left and right rearview mirrors to avoid errors. The model name and year are for reference only, as the same car brand may have some differences in different countries. If you don't know which model is suitable for you, please send us photos of your rearview mirror, left, right, and rear side, and we will answer your question. ^ _ ^.

Suitable for vehicle models

for Chevrolet Silverado 2016 2017 2018 2019
for Chevrolet Silverado LD 2016 2017 2018 2019
for GMC Sierra Limited (2019)

Note:

1. It is recommended that the installation be carried out by professionals.
2. The installation angle of radar will affect the detection distance and effect. Please install it strictly according to the instructions.
3. Rainstorm weather may affect the detection distance and effect.
4. Moving objects approaching 3M behind the vehicle may not be monitored.
5. Because of manual measurement, there may be a change of 1-3 mm (cm).
6. Please provide the correct shipping address and contact information, you know, the courier company will return the package after tried to deliver two times. If this occurs and buyer request us to resend the parcel, buyer should be responsible for all the return and resend postage. thank you for your understanding and attention.

Description

Report Item
Product desciption:
1.This system is a vehicle assistance device that helps driver lane changing safely during driving.

2.With the aid of 24GHz microwave sensor, probe the side / rear of the vehicle for those moving objects into the blind spot of the detection zone.

3.The system works in a set of a control box (controlled by computer), two microwave sensors, two blind region monitor (or LED light), a buzzer and the wire harness which is the perfect connection of microwave and computer.

4.There is blind zone at the rear of the vehicle which is easy to endanger driving safety.! When you installed BSM into your lovely car, no matter it's day time, night time or even in the snow,you can be alerted whenever there is a moving object pop into the rear of the vehicle, with the aid of LED lighting on , blinking, buzzer sound so that the driver can be cautious when lane changing to avoid the possibility of side crash accident.

5.After the vehicle is stopped, the system delays for 30s. When there are bicycles, electric cars, motorcycles, pedestrians and other vehicles near the vehicle, the system will light up and there is a risk of opening the doors. Please confirm the safety before opening the doors.

Six major functions

Security upgrades can only assist
Proactively warn for safe lane changes and stay away from traffic accidents

1.BSD blind spot monitoring

2.AOA overtaking warning

3.LCA parallel auxiliary

4.B-pillar blind spot warning

5.RCTA reverse warning

6.BOW door opening warning

Latest intelligent chips

Equipped with the latest technological algorithms

Solve the problem of false alarms and missed alarms, with an ultra long warranty that can simultaneously detect 32 moving targets at a detection distance of 50 meters

77GHZ

Wide range and wide range detection
Detection distance of 50 meters, wide range and precise detection, easy to avoid blind spots and perspectives, safer driving

BOS blind spot

Real time monitoring system

When vehicle A is driving, it is not possible to see the blind spot view of vehicle B. When vehicle B enters the detection distance, the warning light will light up and flash; When car A turns on the turn signal, the lane changing light flashes and the alarm is accompanied by a beep sound to remind caution when changing lanes

AOA active overtaking/lane change warning

This vehicle overtakes the other vehicle and enters the blind spot of this vehicle (within 87 meters of the rearview mirror facing backwards, the corresponding side rearview mirror will emit LED lights flashing to turn and change lanes, accompanied by a "beep beep" sound to remind the driver)

LCA blind spot merging auxiliary warning system

During driving, the system will automatically activate the LCA function. For targets within 50 meters behind the vehicle that pose a collision risk (collision time less than 5 seconds), the rearview mirror will light up to remind them - intelligent start, avoiding frequent alarms over long distances

B-pillar blind spot

Auxiliary following warning

During the driving process, when detecting the entry of a B-pillar vehicle (within a range of 8 meters), the radar sensor will immediately refract the warning lights triggered by the left and right rearview mirrors, constantly flashing

Ultra low power without power consumption

It's simpler and safer than a recorder to only use the safe power supply

DOW door opening

Anti collision warning system

When the vehicle is parked and ready to open the door, if a target appears within 25 meters behind the door, the LED light will continuously flash and the buzzer will beep to warn the driver or passengers to pay attention to safety.

Not afraid of wind and rain

Not affected by the environment, working in a climate all day long
1. Snowy weather
2. Haze weather
3. Strong light reflection
4. Rainy weather
Assisted lane changing in blind spots during adverse weather conditions provides greater peace of mind

The difference between universal and specialized versions

The universal model is equipped with LED display lights on the left and right A-pillars of the car

The dedicated model has two types of logos displayed on the car mirror: double logo and triangular logo

Product loading display

Real photos of product accessories

Dedicated version

Note: Depending on the model of the car, the accessories may vary.
The specific details are, subject to the actual item received.

Universal version

Installation display

Installation steps

1. Remove the rear bumper and install the left and right millimeter wave radars (hidden installation in the original car style)

2. Wiring, extend the extension line to both sides of the front door according to the original vehicle route

3. Install a dedicated rearview mirror (connect the lens plug to the extension cable)

4. Adjust the radar angle to the optimal state for testing

5. Restore disassembled components and inspect the vehicle

System parameters:

Sensor frequency 72GHZ
Detection accuracy of 0.25CM
Maximum detection range of pedestrians: 0.3M-10M
Motorcycle: 0.3M-40M
Truck: 0.3M-50M
Alarm measuring range of 0.3-50 meters
System efficient car> 98%
Pedestrian> 95%
Alarm mode 1: LED is always on
2: LED flashes + buzzer
Waterproof rating Vehicle grade
Operating current 200MA
Operating voltage 9V-16V
Operating temperature -30 ℃ +80 ℃
Storage temperature -40 ℃ +85 ℃
Detection angle Horizontal 54 ° X Vertical 28 °
About packing:
The actual package of the goods may be different from the picture, But please rest assured, Products are the same,We just choose a more cost-effective shipping cost, to give you a lower price.

Why did you choose us?

1. We are a manufacturer. Our products are sold directly. We guarantee stable quality and very favorable prices.

2. Our products have passed CNAS certification and EU CE certification, so you can buy them safely.

3. As a professional manufacturer of automobile safety products, we can help our buyers to solve all the problems. We are a reliable partner for you.


View full details